24 Search Results

Y₃Fe₅O₁₂ (YIG) thin films are well known for their ferrimagnetic insulating property and low Gilbert damping coefficient (α), allowing them to be used for various spintronic applications and as magneto-optical isolators for photonic devices. Instead of doping, incorporation of plasmonic metals as nanoinclusions could be a promising route for improved magneto-optical coupling properties. In this work, YIG–Au nanocomposites have been deposited with ferrimagnetic insulating YIG as the matrix and Au nanoinclusions which introduce plasmonic absorption, optical anisotropy, and hyperbolic properties. Films with varying Au nanoinclusion densities have been processed and annealed to compare with the as-deposited ones. The films thatmore » had low Au nanoinclusion density and were annealed presented a lower magnetic damping coefficient of 2.84 × 10⁻⁴ than the pure YIG film (9.66 × 10⁻⁴). The as-deposited film with the highest Au density shows the strongest hyperbolic properties among all samples. These results demonstrate that both magnetic damping and optical properties can be tuned through deposition conditions in YIG–Au nanocomposite thin films, allowing for a balance of both properties. This YIG–Au nanocomposite system presents promising potential in next-generation opto-spintronic devices.« less

ZnO thin films have attracted significant interest in the past decades owing to their unique wide band gap properties, piezoelectric properties, non-linearity and plasmonic properties. Recent efforts have been made in coupling ZnO with secondary phases to enhance its functionalities, such as Au–ZnO nanocomposite thin films with tunable optical and plasmonic properties. In this work, magnetic nanostructures of Ni are incorporated in ZnO thin films in a vertically aligned nanocomposite (VAN) form to couple magnetic and plasmonic response in a complex hybrid metamaterial system. Nickel (Ni) is of interest due to its ferromagnetic and plasmonic properties along with gold (Au)more » which is also plasmonic. Therefore, two approaches, namely, tuning of the deposition pressure and use of a ZnO–Au seeding layer have been attempted to achieve unique Ni nanostructures in addition to tuning of the microstructure. Together, both approaches demonstrate a range of microstructures such as core–shell, nanodisk, nanocup, and nanocube-like morphologies not previously attempted. Additionally, there is effective tuning of properties. Specifically, the seeding layer thickness causes hyperbolic behavior as well as redshift in the surface plasmon resonance (SPR) wavelength. The addition of the ZnO–Au seeding layer directly influences the optical properties. Plus, regardless of the different approaches, the films demonstrate magnetic anisotropy based on the composition and microstructure of the film which impacted the saturation magnetization and coercivity. This study demonstrates the potential of ZnO-based complex hybrid metamaterials with coupled electro-magneto-optical properties for integrated photonic devices.« less

Nonlinear intersubband polaritonic metasurfaces produce some of the strongest second- and third-order nonlinear optical responses reported for condensed matter systems at infrared frequencies. These metasurfaces are fabricated as two-dimensional arrays of nanoresonators from multi-quantum-well semiconductor heterostructures, designed to produce strong nonlinear responses associated with intersubband transitions. By optimally coupling the optical modes of the nanoresonators to vertically polarized intersubband transitions in semiconductor heterostructures, one can boost the nonlinear response associated with intersubband transitions, make intersubband transitions interact with free-space radiation at normal incidence, and hence produce optically thin flat nonlinear optical elements compatible with free-space optical setups. As a resultmore » of the strong nonlinear response in these systems, significant nonlinear conversion efficiencies (>0.1 %) can be attained in deeply subwavelength optical films using modest pumping intensities of only 10–100 kW/cm². Subwavelength metasurface thickness relaxes phase-matching constraints limiting the operation of bulk nonlinear crystals. Furthermore, the amplitude and phase of the nonlinear optical response in intersubband polaritonic metasurfaces can be tailored for a specific pump wavelength and a nonlinear process of interest through the co-optimization of quantum engineering of electron states in semiconductor heterostructures and photonic engineering of the metasurface nanoresonators design. Additionally, an applied voltage can dynamically control the amplitude and phase of the nonlinear optical response at a nanoresonator level. Here, we review the current state of the art in this rapidly expanding field, focusing on nonlinear processes supporting second-harmonic generation, saturable absorption, and optical power limiting.« less

Dielectric metasurfaces, through volume‐type photonic resonances, enable precise control of light‐matter interactions for applications including imaging, holography, and sensing. The application space of dielectric metasurfaces has extended from infrared to visible wavelengths by incorporating high refractive index materials, such as titanium dioxide (TiO₂). Understanding the fundamental and fabrication limits for these applications requires metrology with nanoscale resolution, sensitivity to electromagnetic fields within the meta‐atom volume, and far‐field excitation. In this work, photoelectron emission microscopy (PEEM) is used to image field distributions of photonic resonances in a TiO₂ metasurface excited with far‐field, visible‐wavelength illumination. The local volumetric field variations within themore » meta‐atoms are analyzed as a function of illumination angle and polarization by comparing photoelectron images to finite‐difference time‐domain simulations. This study determines the inelastic mean free path of very low‐energy (<1 eV) photoelectrons to be 35 ± 10 nm, which is comparable to the meta‐atom height thereby highlighting PEEM sensitivity to resonances within the volume. Additionally, the simulations reveal high sensitivity of PEEM images to an in‐plane component of the illumination k‐vector. These results demonstrate that photoelectron imaging with subwavelength resolution offers unique advantages for examining light‐matter interactions in volume‐type (as opposed to surface) photonic modes within dielectric nanophotonic structures.« less

Photonic computing has the potential to harness the full degrees of freedom (DOFs) of the light field, including the wavelength, spatial mode, spatial location, phase quadrature, and polarization, to achieve a higher level of computing parallelism and scalability than digital electronic processors. While multiplexing using the wavelength and other DOFs can be readily integrated on silicon photonics platforms with compact footprints, conventional mode-division multiplexed (MDM) photonic designs occupy areas exceeding tens to hundreds of microns for a few spatial modes, significantly limiting their scalability. Here, we utilize inverse design to demonstrate an ultracompact photonic computing core that calculates vector dotmore » products based on MDM coherent mixing. Our dot-product core integrates the functionalities of two-mode multiplexers and one multimode coherent mixer within a nominal footprint of 5 μm x 3 μm . We have experimentally demonstrated computing examples on the fabricated dot-product core, including complex number multiplication and motion estimation using optical flow. The compact dot-product core design enables large-scale on-chip integration in a parallel photonic computing primitive cluster for high-throughput scientific computing and computer vision tasks.« less

The demonstration of epitaxial thin film transfer has enormous potential for thin film devices free from the traditional substrate epitaxy limitations. However, large-area continuous film transfer remains a challenge for the commonly reported polymer-based transfer methods due to bending and cracking during transfer, especially for highly strained epitaxial thin films. In this work, a new epoxy-based, rigid transfer method is used to transfer films from an SrTiO₃ (STO) growth substrate onto various new substrates, including those that will typically pose significant problems for epitaxy. An epitaxial multiferroic Bi₃Fe₂Mn₂O_x (BFMO) layered supercell (LSC) material is selected as the thin film formore » this demonstration. The results of surface and structure studies show an order of magnitude increase in the continuous area of transferred films when compared to previous transfer methods. The magnetic properties of the BFMO LSC films are shown to be enhanced by the release of strain in this method, and ferromagnetic resonance is found with an exceptionally low Gilbert damping coefficient. The large-area transfer of this highly strained complex oxide BFMO thin film presents enormous potential for the integration of many other multifunctional oxides onto new substrates for future magnetic sensors and memory devices.« less

Abstract Modern lens designs are capable of resolving greater than 10 gigapixels, while advances in camera frame-rate and hyperspectral imaging have made data acquisition rates of Terapixel/second a real possibility. The main bottlenecks preventing such high data-rate systems are power consumption and data storage. In this work, we show that analog photonic encoders could address this challenge, enabling high-speed image compression using orders-of-magnitude lower power than digital electronics. Our approach relies on a silicon-photonics front-end to compress raw image data, foregoing energy-intensive image conditioning and reducing data storage requirements. The compression scheme uses a passive disordered photonic structure to performmore » kernel-type random projections of the raw image data with minimal power consumption and low latency. A back-end neural network can then reconstruct the original images with structural similarity exceeding 90%. This scheme has the potential to process data streams exceeding Terapixel/second using less than 100 fJ/pixel, providing a path to ultra-high-resolution data and image acquisition systems.« less

Vertically aligned nanocomposites (VANs) are unique thin films with vertical nanostructures embedded in a matrix material, allowing for the integration of two distinct materials. These nanocomposites offer novel combined physical properties, such as nanocomposite-based multiferroics and strongly coupled physical properties, such as magneto-optic coupling. Much work has been conducted in exploring different two-phase combinations and various processing conditions to achieve novel tunable properties that cannot be obtained by any single-phase material alone. Here, in this work, the target configuration effects are explored for the growth of LaFeO₃–CoNi₂O₄ VANs. Both mixed and pie-shaped targets are utilized to compare the target configurationmore » effects on the phase separation, morphology tuning, and their resulting physical properties, including optical and magnetic properties. This work suggests that the target configuration is another important parameter for achieving the desired VAN morphology and can be used to design different two-phase VANs with tailorable properties.« less

Abstract The widespread adoption of machine learning and other matrix intensive computing algorithms has renewed interest in analog optical computing, which has the potential to perform large-scale matrix multiplications with superior energy scaling and lower latency than digital electronics. However, most optical techniques rely on spatial multiplexing, requiring a large number of modulators and detectors, and are typically restricted to performing a single kernel convolution operation per layer. Here, we introduce a fiber-optic computing architecture based on temporal multiplexing and distributed feedback that performs multiple convolutions on the input data in a single layer. Using Rayleigh backscattering in standard singlemore » mode fiber, we show that this technique can efficiently apply a series of random nonlinear projections to the input data, facilitating a variety of computing tasks. The approach enables efficient energy scaling with orders of magnitude lower power consumption than GPUs, while maintaining low latency and high data-throughput.« less

Magnetic and ferroelectric oxide thin films have long been studied for their applications in electronics, optics, and sensors. The properties of these oxide thin films are highly dependent on the film growth quality and conditions. To maximize the film quality, epitaxial oxide thin films are frequently grown on single-crystal oxide substrates such as strontium titanate (SrTiO₃) and lanthanum aluminate (LaAlO₃) to satisfy lattice matching and minimize defect formation. However, these single-crystal oxide substrates cannot readily be used in practical applications due to their high cost, limited availability, and small wafer sizes. One leading solution to this challenge is film transfer.more » In this demonstration, a material from a new class of multiferroic oxides is selected, namely bismuth-based layered oxides, for the transfer. A water-soluble sacrificial layer of Sr₃Al₂O₆is inserted between the oxide substrate and the film, enabling the release of the film from the original substrate onto a polymer support layer. The films are transferred onto new substrates of silicon and lithium niobate (LiNbO₃) and the polymer layer is removed. These substrates allow for the future design of electronic and optical devices as well as sensors using this new group of multiferroic layered oxide films.« less